Forklifts are vehicles commonly found in factories, warehouses and various work locations where it is necessary to move heavy materials from one location to another. The mast is the mechanism situated on the front of the forklift which hydraulically lowers and raises the load. The "cat" is the area which is protected where the forklift driver sits.
Forklifts can lift loads that weigh between one to five tons. Some types can be utilized to carry shipping containers and much heavier loads.
The tires of a forklift should be checked and maintained frequently. The kinds of tires on various forklifts vary based on factors like for example ground surfaces, frequency of use and weight of the loads. Each and every operator of a forklift must have access to a forklift jack, tire press and replacement tires.
Tire Maintenance Instructions
You should frequently check the tires. Watch for signs of damage and wear to the tires. If the wear on the tire exceeds 40 percent, it should be replaced.
When buying tires, make sure that you are buying the correct type - solid, pneumatic or polyurethane.
When the tire needs replacing, position the forklift jack under the tire and raise the forklift high enough that you can change the tires easily.
In order to remove the damaged tire, pull the tire from the rim utilizing the tire press. Install the new tire and secure it well. If you are changing more than one tire and you only have one jack, lower the forklift, and after that reposition the jack at the next tire.
A repair company could offer on-site tire repair. If the tire is extremely large for both in-house and mobile tire presses, the damaged tire must be transported to a shop that has a stationary tire press.