Daewoo Propane Forklifts Fresno

Change a Propane Tank

Forklifts fueled by propane are common inside warehouse settings. These forklifts have a propane mount situated behind the driver. These tanks need to be replaced periodically as they have limited lifespans. Forklift drivers should always use care when handling propane tanks. Compressed gases are really hazardous, particularly since the gas is flammable. Utilize care when removing and replacing propane tank to avoid injury.



1 To change a propane tank, first stop the forklift while leaving the engine running, and turn off the valve on the tank. Let the forklift run until the engine dies. This procedure burns off the gas inside the transfer hose which connects the engine and the tank. Before taking the next steps, put on the correct safety equipment, like for example insulated gloves made of either leather or neoprene. It is vital for you to protect your skin from touching the compressed gas, that is very cold.

2 Disconnect the hose from the tank and take off the holding straps to remove the tank. When you put in a new tank, reconnect the holding straps and reattach the hose at the valve of the tank by tightening the nut.

3 You can inspect for leaks by applying soapy water to the valve and opening it slightly. Leaking gas will cause bubbles to froth around the value. If this occurs, check the connection hose at the nut and the valve area. The connecting nut should be re-tightened if you detect any leaks in the area of the valve, and afterward do the leak checking process all over again. Persistent leaks mean that both the nut and connecting hose will have to be replaced. Nonetheless, if replacing the hose and nut still does not stop the leak, the tank will need to be replaced.

4 Open the valve all the way to enable the gas to fill the connecting hose. After that you could start the forklift and continue working.

• Hyster High Capacity Forklift Fresno
  The high capacity model H360HD2-EC4 forklift comes with the Cummins QSB6.7-155 diesel engine, a unique rear light cluster that includes turn signals, back-up and brake lights, along with hydrostatic load sense steering. This model is... More
• Taylor Container Forklift Fresno
  Since 1976, Taylor Machine Works has built, designed and marketed empty container handlers. The "Big Red" line of empty handlers reflects the experience and knowledge gained in those years. The Taylor empty handlers are known... More
• Terex Articulated Man Lifts Fresno
  Various Kinds of Aerial Lift A specialized type of heavy machinery which enables a person to be lifted into the air is aerial lifts. These machines are typically used to perform repairs on areas which... More
• Jungheinrich Propane Forklift Fresno
  Forklift Parts in More Detail There are numerous parts which make up a lift truck. The forklifts major parts include the truck frame, the engine parts, the tilt cylinders, the overhead guard and the wheels.... More
• Hyundai Cushion Tire Forklifts Fresno
  Forklift Tires When it comes to types of installation, there are two types regarding forklift tires: press on and standard. Normally, press on tires are used on electric forklifts and those models utilized indoors like... More